Call Toll Free: 800.432.7550

FA2 PVC

Laser Fume Extractor for PVC

The Fumex FA2-PVC laser fume extractor is specifically designed to capture and treat the potentially hazardous fumes generated in application where PVC is marked or cut with a laser, thermoformed or heated.

 

Epoxy Coating – The Fumex FA2PVC utilizes a high build epoxy novolac coating on all internal cabinet components. The material provides superior corrosion resistance to HCL and other acid gases. Prior to application the cabinets are prepped with a sandblasting to SSSP10 and all seams are caulked per manufacturer’s specifications. Two (2) coats of the epoxy are applied to a DFT of 4 mils.

HCL Sensor – The Fumex FA2PVC is fitted with a continuous gas detector for the detection of Hydrogen Chloride breakthrough. The HCL gas sensor is a complete self-contained monitor consisting of an integral 115VAC power supply and factory pre-set solid-state relay alarm for activating panel-warning lamp. The system features microprocessor electronics that set the gas curves for HCl detection. The electronics continuously check the sensor cell operation 24-7 and provide immediate indication of cell failure. The sensor includes built-in temperature compensation and alarm delay to prevent nuisance alarms. Sensor electronics are housed in a steel, panel-mounted enclosure. The sensor is set at OSHA limits to insure operator safety.

FA2-PVC Specifications
Cabinet Construction Cabinet: 304 grade brushed stainless steel to
IP56 compliance
Baffled – sound attenuated
Digital Controls • Electronic variable speed blower control
• Electronic individual filter monitoring w/ display
• Calibrated electronic VOC /gas sensor
• Electronic relays for remote start/stop
and filter monitoring
Sound Level 60 dBA
Weight 101 lb / 46 kg
Blowers Performance 210 cfm @ 39” wc (357 m3/hr @ 9686 Pa)
Blowers Centrifugal Centrifugal - direct-drive, brushless motor
Electrics 120/1/50-60 or 230/1/50-60
Pre-wired 3 wire power cable,
7.5 ft (2.3m) w/plug
Amp Draw: 12.0 / 7.5
Standard Equipment UL and CE listed compliance
Standard Filter Set
8 ft. /2.5m 2-ply rubber hose, smooth core
2”/51mm or 3”/76mm inside diameter w/hose clamps
Digital graphic controls
(4) Industrial grade wheels – 2 locking
Installation guide / Operations manual
Epoxy Coating 2 coats corrosion resistant epoxy
Options Gas-specific filters
High efficiency hoods
Optional ducted exhaust
PVC option:
- Epoxy coating on all internal cabinet components
- HCL gas specific electronic sensor
- AcideX gas neutralizing adsorbent cell
Standard Filter Set Pre-Filter
• Large capacity - 99% efficient @ 1 micron
• Deep-pleated dimpled media maximizes filter loading
• Unique construction eliminates filter ”blinding”
• Clean design limits operator exposure to particulates
during filter changes
HEPA Filter
• 99% efficient @ .3micron
• Large capacity mini-pleat construction
Gas/Odor Filter
• Blended media allows for broad spectrum gas/odor control
• Improved bonded carbon technology maximizes one pass
efficiency
• Dustless construction suitable for all environments
• 100 % recyclable construction
Options:
PVC option:
• Epoxy coating on all internal cabinet components
• HCL gas specific electronic sensor
• AcideX gas neutralizing adsorbent cell
High efficiency hoods
Optional ducted exhaust
Gas-specific filters

APPLICATIONS:
Laser Fume Extraction
Pharmaceutical /Medical Manufacturing
Laboratory/Cleanroom Etc…
APPLICATIONS:
Laser Fume Extraction
Pharmaceutical /Medical Manufacturing
Laboratory/Cleanroom Etc…

AIHA

CDCLIAOSHAULCE