Call Toll Free: 800.432.7550

3D Printing Fume Extraction

Fumex manufactures a complete line of 3D printer fume extractors specifically designed for 3D printers and 3D printing applications. They remove fumes and particulates generated in the 3D printing process.

Laser printing and 3D printing create unhealthy fumes, smoke & pollutants (see the article here).

Our 3D printer fume extraction systems remove 99.97% of these dangerous fumes and ultrafine particles (UFP). They are permanent or portable, cost efficient, easy to integrate and reliable with a 2 year warranty.

Fumex 3D fume extractors are designed to work with all 3D printer manufacturers and easily integrate into any environment. Our American Made air filtration systems consist of inexpensive pre-filters, HEPA filters and gas/odor filters that remove harmful 3D printing fumes and return purified air to the workplace. VOC sensors indicate when filters need to be replaced to insure safe operating conditions.

The National Institute for Occupational Safety and Health (NIOSH) June 2016

  • Found that the tested desktop 3D printer released high numbers of ultrafine particles (UFP's) as it printed. The emissions peaked a few minutes after printing began, and they did not return to baseline until about 100 minutes after printing ended.
  • Investigators found that using the manufacturer-supplied cover on the printer decreased the number of particles by two times, but the reduced number was still high.
  • Desktop 3D printers emitted smaller particles than those from laser printers that use plastic toner and far greater amounts of certain chemicals linked to asthma.
  • Toxicological studies confirmed that UFP in 3d printer fumes penetrate into the alveolar region of the lungs and produce inflammatory responses.

FA1-Mini
FA1
FA2
FA5
FA2 PVC
FA1-Mini for Laser Fume Extractors for Laser Engraving & Marking FA1 for Laser Fume Extractors for Laser Engraving & Marking FA2 for Laser Fume Extractors for Laser Engraving & Marking FA5 for Laser Fume Extractors for Laser Engraving & Marking FA2 PVC for Laser Fume Extractors for Laser Engraving & Marking
Cabinet Construction Cabinet: 16 ga . welded steel,
powdercoat finish
Baffled – sound attenuated
Cabinet: 16 ga . welded steel, powdercoat finish
Baffled – sound attenuated
Cabinet: 304 grade brushed stainless steel to
IP56 compliance
Baffled – sound attenuated
Cabinet: 304 grade brushed stainless steel
Front access to filters
Baffled – sound attenuated cabinet
304 grade brushed stainless steel to IP56 compliance
Baffled – sound attenuated
Digital Controls • Electronic variable speed blower control
• Electronic individual filter monitoring w/ display
• Calibrated electronic VOC /gas sensor
• Electronic relays for remote Start/Stop.
• Electronic variable speed blower control
• Electronic filter monitoring w/ display
• Calibrated electronic VOC /gas sensor
• Electronic relays for remote Start/Stop.
• Electronic variable speed blower control
• Electronic individual filter monitoring w/ display
• Calibrated electronic VOC /gas sensor
• Electronic relays for remote Start/Stop and filter monitoring.
• Electronic variable speed blower control
• Individual filter monitoring w/ display
• Calibrated electronic voc/gas sensor
• Electronic relays for remote Start/Stop and filter monitoring.
• Electronic individual filter monitoring w/ display
• Electronic variable speed blower control
• HCL specific electronic gas sensor
• Electronic relays for remote Start/Stop and filter monitoring.
Sound Level 59 dBA 59 dBA 60 dBA 59 dBA 60 dBA
Unit Dimensions (L x W x H) 18” x 13.62” x 13.62"
45 lb / 20.42 kg
13.75” x 15.25” x 27.75”
80 lb / 26.8 kg
15.25” x 34.75”
101 lb / 46 kg
22.5” x 23” x 36”
135 lb / 61.3 kg
18.5” x 15.25” x 34.75”
101 lb / 46 kg
Blowers Performance 165 cfm at 19" wc 165 cfm at 19" wc 210 cfm @ 39” wc
(357 m3/hr @ 9686 Pa)
210 cfm @39” wc or 385 @ 39’” wc 210 cfm at 39” wc
(357 m3/hr at 9686 Pa)
Blowers Centrifugal Direct-drive, brushless motor Direct-drive, brushless motor Centrifugal - direct-drive, brushless motor Sealed Direct –drive brushless motor Direct-drive, brushless motor
20000 + mtbf
Electrics 120/1/50-60 or 230/1/50-60
Pre-wired 3 wire power cable,
7.5 ft (2.3m) w/plug
Amp Draw: 6.0 / 4.0
120/1/50-60 or 230/1/50-60
Pre-wired 3 wire power cable,
7.5 ft (2.3m) w/plug
Amp Draw: 6.0 / 4.0
120/1/50-60 or 230/1/50-60
Pre-wired 3 wire power cable,
7.5 ft (2.3m) w/plug
Amp Draw: 12.0 / 7.5
120/1/50-60 or 230/1/50-60
Pre-wired , grounded power cable,
7.5 ft. w/ plug
Amp draw – 12.0 / 15.0
120/1/50-60 or 230/1/50-60
Amp Draw: 12.0 / 7.5
Pre-wired 3 wire power cable, 7.5 ft (2.3m) w/plug
Self-cleaning pleated dust-bag
Standard Equipment UL listed compliance
Standard Filter Set
1 x 3”, 1 x 2” or 2 x 2” air inlet
5 ft. 2-ply rubber hose, smooth core
2”/51mm or 3”/76mm inside diameter w/hose clamps
(4) Industrial grade wheels
Installation guide / Operations manual
UL listed compliance
Standard Filter Set
1 x 3”, 1 x 2” or 2 x 2” air inlet
5 ft. 2-ply rubber hose, smooth core
2”/51mm or 3”/76mm inside diameter w/hose clamps
(4) Industrial grade wheels
Installation guide / Operations manual
UL and CE listed compliance
Standard Filter Set
8 ft. /2.5m 2-ply rubber hose, smooth core
2”/51mm or 3”/76mm inside diameter w/hose clamps
Digital graphic controls
(4) Industrial grade wheels – 2 locking
Installation guide / Operations manual
Standard Filter Set
3”, 4” or 6” diameter inlet
8 ft 2 ply-smooth core rubber hose
Digital Graphic Controls
Interface Package
(4) Industrial grade wheels – 2 locking
Operation Manuals
(4) Industrial grade wheels – 2 locking
2”/51mm or 3”/76mm inside diameter w/hose clamps
8 ft. /2.5m 2-ply rubber hose, smooth core
Digital Graphic Controls
Installation guide / Operations manual – (English, Italian, Spanish, German, French)
Standard Filter Set
UL and CE listed compliance
Epoxy Coating N/A N/A N/A N/A 2 coats corrosion resistant epoxy
Options High efficiency hoods
Optional ducted exhaust
Gas-specific filters
High efficiency hoods
Optional ducted exhaust
Gas-specific filters
Gas-specific filters
High efficiency hoods
Optional ducted exhaust
PVC option:
- Epoxy coating on all internal cabinet components
- HCL gas specific electronic sensor
- AcideX gas neutralizing adsorbent cell
Ducted Exhaust
Gas-Specific carbon filters
Stainless steel pre-filter box
Standard Filter Set Pre-Filter(s):Polyester pre-filter
Large capacity MERV 11 panel filter
HEPA Filter: 99.97% efficient @ 0.3 micron
Adsorbent Cell: Large capacity gas filter
• Blended activated carbon and activated alumina
impregnated with potassium permanganate (provides
broad spectrum gas control)
• 100 % recyclable environmentally safe cell.
Pre-filter
• Inexpensive polyester pre-filter
• MERV 11 rated filter media
• Clean design limits operator exposure
to particulates during filter changes
HEPA Filter
• 99% efficient @ .3micron
• Large capacity mini-pleat construction
Gas/Odor Filter
• Blended media allows for broad spectrum gas/odor control
• Improved bonded carbon technology
maximizes one pass
efficiency • Dustless construction suitable for all environments
• 100 % recyclable construction
Pre-Filter
• Large capacity - 99% efficient @ 1 micron
• Deep-pleated dimpled media maximizes filter loading
• Unique construction eliminates filter ”blinding”
• Clean design limits operator exposure to particulates
during filter changes
HEPA Filter
• 99% efficient @ .3micron
• Large capacity mini-pleat construction
Gas/Odor Filter
• Blended media allows for broad spectrum gas/odor control
• Improved bonded carbon technology maximizes one pass
efficiency
• Dustless construction suitable for all environments
• 100 % recyclable construction
Options:
PVC option:
• Epoxy coating on all internal cabinet components
• HCL gas specific electronic sensor
• AcideX gas neutralizing adsorbent cell
High efficiency hoods
Optional ducted exhaust
Gas-specific filters
Pre-Filter
• Approx – 95 sq feet of media
• Deep-pleated dimpled media w/ inner and outer
pleat-lock
• Beverage board construction
HEPA Filter
• 99.97% efficient @ 0.3 microns
• Large capacity mini-pleat construction
• Galvanized steel frame
Gas/Odor Filter
• 25 lbs of media
• Bonded carbon technology
• Broad spectrum gas/odor control
• Galvanized steel frame
HEPA Filter: 99.97% efficient at 0.3 micron
Pre-Filter: Large capacity pre-filter
- 99% efficient at 1.0 micron
- Constructed of highest quality filtration material
Adsorbent Cell: Large capacity gas filter

FA1-Mini
FA1
FA2
FA5
FA2 PVC
FA1-Mini for Laser Fume Extractors for Laser Engraving & Marking FA1 for Laser Fume Extractors for Laser Engraving & Marking FA2 for Laser Fume Extractors for Laser Engraving & Marking FA5 for Laser Fume Extractors for Laser Engraving & Marking FA2 PVC for Laser Fume Extractors for Laser Engraving & Marking
Cabinet Construction Cabinet: 16 ga . welded steel,
powdercoat finish
Baffled – sound attenuated
Cabinet: 16 ga . welded steel, powdercoat finish
Baffled – sound attenuated
Cabinet: 304 grade brushed stainless steel to
IP56 compliance
Baffled – sound attenuated
Cabinet: 304 grade brushed stainless steel
Front access to filters
Baffled – sound attenuated cabinet
304 grade brushed stainless steel to IP56 compliance
Baffled – sound attenuated
Digital Controls • Electronic variable speed blower control
• Electronic individual filter monitoring w/ display
• Calibrated electronic VOC /gas sensor
• Electronic relays for remote Start/Stop.
• Electronic variable speed blower control
• Electronic filter monitoring w/ display
• Calibrated electronic VOC /gas sensor
• Electronic relays for remote Start/Stop.
• Electronic variable speed blower control
• Electronic individual filter monitoring w/ display
• Calibrated electronic VOC /gas sensor
• Electronic relays for remote Start/Stop and filter monitoring.
• Electronic variable speed blower control
• Individual filter monitoring w/ display
• Calibrated electronic voc/gas sensor
• Electronic relays for remote Start/Stop and filter monitoring.
• Electronic individual filter monitoring w/ display
• Electronic variable speed blower control
• HCL specific electronic gas sensor
• Electronic relays for remote Start/Stop and filter monitoring.
Sound Level 59 dBA 59 dBA 60 dBA 59 dBA 60 dBA
Unit Dimensions (L x W x H) 18” x 13.62” x 13.62"
45 lb / 20.42 kg
13.75” x 15.25” x 27.75”
80 lb / 26.8 kg
15.25” x 34.75”
101 lb / 46 kg
22.5” x 23” x 36”
135 lb / 61.3 kg
18.5” x 15.25” x 34.75”
101 lb / 46 kg
Blowers Performance 165 cfm at 19" wc 165 cfm at 19" wc 210 cfm @ 39” wc
(357 m3/hr @ 9686 Pa)
210 cfm @39” wc or 385 @ 39’” wc 210 cfm at 39” wc
(357 m3/hr at 9686 Pa)
Blowers Centrifugal Direct-drive, brushless motor Direct-drive, brushless motor Centrifugal - direct-drive, brushless motor Sealed Direct –drive brushless motor Direct-drive, brushless motor
20000 + mtbf
Electrics 120/1/50-60 or 230/1/50-60
Pre-wired 3 wire power cable,
7.5 ft (2.3m) w/plug
Amp Draw: 6.0 / 4.0
120/1/50-60 or 230/1/50-60
Pre-wired 3 wire power cable,
7.5 ft (2.3m) w/plug
Amp Draw: 6.0 / 4.0
120/1/50-60 or 230/1/50-60
Pre-wired 3 wire power cable,
7.5 ft (2.3m) w/plug
Amp Draw: 12.0 / 7.5
120/1/50-60 or 230/1/50-60
Pre-wired , grounded power cable,
7.5 ft. w/ plug
Amp draw – 12.0 / 15.0
120/1/50-60 or 230/1/50-60
Amp Draw: 12.0 / 7.5
Pre-wired 3 wire power cable, 7.5 ft (2.3m) w/plug
Self-cleaning pleated dust-bag
Standard Equipment UL listed compliance
Standard Filter Set
1 x 3”, 1 x 2” or 2 x 2” air inlet
5 ft. 2-ply rubber hose, smooth core
2”/51mm or 3”/76mm inside diameter w/hose clamps
(4) Industrial grade wheels
Installation guide / Operations manual
UL listed compliance
Standard Filter Set
1 x 3”, 1 x 2” or 2 x 2” air inlet
5 ft. 2-ply rubber hose, smooth core
2”/51mm or 3”/76mm inside diameter w/hose clamps
(4) Industrial grade wheels
Installation guide / Operations manual
UL and CE listed compliance
Standard Filter Set
8 ft. /2.5m 2-ply rubber hose, smooth core
2”/51mm or 3”/76mm inside diameter w/hose clamps
Digital graphic controls
(4) Industrial grade wheels – 2 locking
Installation guide / Operations manual
Standard Filter Set
3”, 4” or 6” diameter inlet
8 ft 2 ply-smooth core rubber hose
Digital Graphic Controls
Interface Package
(4) Industrial grade wheels – 2 locking
Operation Manuals
(4) Industrial grade wheels – 2 locking
2”/51mm or 3”/76mm inside diameter w/hose clamps
8 ft. /2.5m 2-ply rubber hose, smooth core
Digital Graphic Controls
Installation guide / Operations manual – (English, Italian, Spanish, German, French)
Standard Filter Set
UL and CE listed compliance
Epoxy Coating N/A N/A N/A N/A 2 coats corrosion resistant epoxy
Options High efficiency hoods
Optional ducted exhaust
Gas-specific filters
High efficiency hoods
Optional ducted exhaust
Gas-specific filters
Gas-specific filters
High efficiency hoods
Optional ducted exhaust
PVC option:
- Epoxy coating on all internal cabinet components
- HCL gas specific electronic sensor
- AcideX gas neutralizing adsorbent cell
Ducted Exhaust
Gas-Specific carbon filters
Stainless steel pre-filter box
Standard Filter Set Pre-Filter(s):Polyester pre-filter
Large capacity MERV 11 panel filter
HEPA Filter: 99.97% efficient @ 0.3 micron
Adsorbent Cell: Large capacity gas filter
• Blended activated carbon and activated alumina
impregnated with potassium permanganate (provides
broad spectrum gas control)
• 100 % recyclable environmentally safe cell.
Pre-filter
• Inexpensive polyester pre-filter
• MERV 11 rated filter media
• Clean design limits operator exposure
to particulates during filter changes
HEPA Filter
• 99% efficient @ .3micron
• Large capacity mini-pleat construction
Gas/Odor Filter
• Blended media allows for broad spectrum gas/odor control
• Improved bonded carbon technology
maximizes one pass
efficiency • Dustless construction suitable for all environments
• 100 % recyclable construction
Pre-Filter
• Large capacity - 99% efficient @ 1 micron
• Deep-pleated dimpled media maximizes filter loading
• Unique construction eliminates filter ”blinding”
• Clean design limits operator exposure to particulates
during filter changes
HEPA Filter
• 99% efficient @ .3micron
• Large capacity mini-pleat construction
Gas/Odor Filter
• Blended media allows for broad spectrum gas/odor control
• Improved bonded carbon technology maximizes one pass
efficiency
• Dustless construction suitable for all environments
• 100 % recyclable construction
Options:
PVC option:
• Epoxy coating on all internal cabinet components
• HCL gas specific electronic sensor
• AcideX gas neutralizing adsorbent cell
High efficiency hoods
Optional ducted exhaust
Gas-specific filters
Pre-Filter
• Approx – 95 sq feet of media
• Deep-pleated dimpled media w/ inner and outer
pleat-lock
• Beverage board construction
HEPA Filter
• 99.97% efficient @ 0.3 microns
• Large capacity mini-pleat construction
• Galvanized steel frame
Gas/Odor Filter
• 25 lbs of media
• Bonded carbon technology
• Broad spectrum gas/odor control
• Galvanized steel frame
HEPA Filter: 99.97% efficient at 0.3 micron
Pre-Filter: Large capacity pre-filter
- 99% efficient at 1.0 micron
- Constructed of highest quality filtration material
Adsorbent Cell: Large capacity gas filter

APPLICATIONS:
Laser Fume Extraction
Pharmaceutical /Medical Manufacturing
Laboratory/Cleanroom Etc…
APPLICATIONS:
Laser Fume Extraction
Pharmaceutical /Medical Manufacturing
Laboratory/Cleanroom Etc…

AIHA

CDCLIAOSHAULCE