Replacement Filters for Indoor Air Purifiers & Fume Extractors
Choose the Replacement Air Filter that corresponds to the Fumex Industrial Air Cleaner or fume extractor that is in use by your organization. Specific applications require certain filters for optimum efficacy.
To ensure the proper filter gets ordered. 1) Power down Fumex fume extractor. 2) Disconnect power.
3) Remove filter(s) and record a) the number of filters and b) the Filter Item #'s, found on each filter. For best results, all filters inside the system should be replaced at the same time.
Feel free to call a Fumex team member at 800.432.7550, if you have any questions relating to which Fumex Replacement Filter best suits your application's needs.
Replacement Filters for FA1 Mini / FA1-E-Mini / FA1-D-Mini
FA1 Mini Pre-filter
- Woven Polyester Pre-Filter
- Application: Pre-Filter
- Filter Type: Woven Polyester
- Efficiency: N/A
Replacement Filters for FA1 / FA1-E / FA1-D
FA1 Pre-Filter
The Fumex FA102B filter incorporates a high performance spun bound polyester media and a high performance framed merv 11 media housed in white .024” beverage board frames.
The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.
- Application: Various
- Filter Type: Merv 11
- Efficiency: Pre-Filter
Replacement Filters for FA2 / FA2-E / FA2-D
FA2 – Pre-filter
The Fumex FA140B-2 Replacement Filter incorporates high performance framed cellulose media. The filters will be housed in white .024” beverage board frames that consisting of 50 pleats. The pleats will have both inner and outer pleat lock.
The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass.
A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.
Part # FA140B-2
- Application: Particulate
- Filter Type: Pre-Filter
- Efficiency: 99% efficient at 0.1 µm
Replacement Filters for FA5 / FA5-E / FA5-D
FA5 Pre-filter
The FA540B filter incorporates high performance framed cellulose media. The filters are housed in white .024” beverage board frames that consists of 100 pleats. The pleats will have both inner and outer pleat lock. The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.
- Application: Various
- Filter Type: Pre-Filter
- Efficiency: 95% efficient at 0.1 µm
The 18” x 18” x 4” FA500 3D fume filter incorporates high performance HEPA media composed of borosilicate microfibers with an acrylic resin binder. This glass microfiber media is tested and certified at the manufacturer as meeting HEPA media standards with a DOP maximum smoke penetration of 99.97% efficient at 0.3 µm @ 10.5 ft/minute. The media is tested at the manufacturer to industry standards ASTM method F778-82 for permeability and the ASTM method D-2986 for DOP smoke penetration.
The 18” x 18” x 4” Fumex FA501D Replacement Filter incorporates high performance blended bonded activated carbon technology. Bonded technology provides superior adsorption with minimal airflow resistance.Replacement Filters for GS-100
FA2 Gas/Odor Filter
12” x 12” x 6” FA201D 3D printer filter & laser printer filter incorporates high performance bonded activated carbon technology designed for the removal of the gases/odors produced in 3D printing & laser applications. Bonded technology provides superior adsorption with minimal airflow resistance.
The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps to prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board
Filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.
Part # FA201D
- Application: Gas / Odor; 3D printing & laser applications
- Filter Type: Bonded activated carbon technology
- Efficiency: N/A
Replacement Filters for GS2-200
FX7 Replacement Pre-Filter
- Dimension – 12” x 12” x 1”
- Construction – Spunbond polyester with tackifier
- Efficiency – 35%@ 5 micron
Replacement Filters for GS3-200 / GS3-500
GS3-200 Pre-filter
The FA540B filter incorporates high performance framed cellulose media. The filters are housed in white .024” beverage board frames that consists of 100 pleats. The pleats will have both inner and outer pleat lock. The filter media element incorporates edge seal technology which is a continuous bead of hot melt that helps prevent air bypass. A quick recovery, super-resilient polyurethane foam gasket is applied onto a thick moisture resistant beverage board frame. Each filter is labeled to identify the air flow pattern and a handle is attached for ease in removal.
- Application: Various
- Filter Type: Pre-Filter
- Efficiency: 95% efficient at 0.1 µm
APPLICATIONS:
Laser Fume Extraction
Pharmaceutical /Medical Manufacturing
Laboratory/Cleanroom Etc…
APPLICATIONS:
Laser Fume Extraction
Pharmaceutical /Medical Manufacturing
Laboratory/Cleanroom Etc…
